Oscilloscopes


One of the most important types of test equipment used in troubleshooting, an oscilloscope ("scope") is a test equipment that provides a visible graphical display of the waveform being measured. It can be used to measure peak-to-peak voltage, frequency, time periods, wave slopes, phase angles and frequency response. Most oscilloscopes have dual-trace capabilities and storage feature.

Alexan oscilloscopes offer a wide selection of analog and digital storage, bandwidth, and additional features such as Component Tester, advanced triggering and Fast Fourier Transform (FTT) math function.


Available Oscilloscope Models


DS1000A Series Digital Oscilloscopes


View larger image

View Specifications

Product Dimensions: Weight: 2.3 kg
Width×Height×Depth = 303mm×154mm×133mm

Applications:
  • Design and Debug
  • Manufacturing
  • Education and Training
  • Service and Repair
Model DS1102CA DS1302CA
Bandwidth 100MHz 300MHz
Real-time Sample Rate 2 GSa/s(Single Channel), 1 GSa/s(Dual Channels)
Equivalent Sample Rate 50 GSa/s
refresh rate 2000 wfms/s
Memory Depth 10 kpts (Single Channel), 5 kpts (Dual Channel)

Back to List of Oscilloscopes
Back to Main Menu

DS1000E/D Series Digital Oscilloscopes


View larger image

View Specifications

Product Dimensions: Weight: 2.4 kg
Width×Height×Depth = 303mm×154mm×133mm

Applications:
  • Design and Debug
  • Manufacturing
  • Education and Training
  • Service and Maintenance
Model DS1102E DS1052E DS1102D
Bandwidth 100 MHz 50 MHz 100 MHz
Logic Analyze × √

Back to List of Oscilloscopes
Back to Main Menu

TDS-2012 Tektronix 2-Channel 100MHz Digital Storage Oscilloscope



View larger image

 The TDS-2012 digital storage oscilloscopes delivers an unbeatable combination of superior performance, unmatched ease-of-use and affordability in an ultra lightweight, portable package. TDS-2012 color LCD display dedicates a different color for each trace and its associated readouts, enabling easy identification between the traces and readouts for each channel.

With up to 100MHz bandwidth and 1GS/s maximum sample rate, the TDS-2012 oscilloscope provide accurate real-time acquisition up to its full bandwidth. This instrument offers advanced triggering, such as pulse width triggering, and 11 standard automatic measurements. The Fast Fourier Transform (FFT) math function allows the user to analyze, characterize and troubleshoot circuits by viewing frequency and signal strength.
SPECIFICATIONS:
  • 100MHz Bandwidth
  • Sample Rates up to 1GS/s
  • 2 Channels
  • Color LCD Display
  • Autoset Menu with Waveform Selection
  • Probe Check Wizard To Ensure Correct Probe Usage
  • Context-sensitive Help
  • Dual Time Base
  • Advanced Triggering
  • 11 Automatic Measurements
  • Multi-language User Interface
  • Waveform and Setup Memories
  • FFT Standard

Back to List of Oscilloscopes
Back to Main Menu

AS-40M/FS-409 40MHz Multifunction Oscilloscope


View larger image

A 40MHz analog oscilloscope built-in with a 5MHz function generator, and a 50MHz auto-range, auto-gatetime counter. Its function generator and counter can be operated independently or jointly.


SPECIFICATIONS:
  • CRT Type: 6-inch rectangular with integral graticule, P31 phosphor
  • Display Area: 8x10 div (1 div = 1 cm)
  • Accelerating Voltage: 2kV
  • Trace Rotation: Electrical, front panel adjustable
  • Cal/Probe Compensation Voltage: 2Vp-p +3% square wave, 1kHz nominal
  • CH2 (Y) Output: 50mV/div (nominal into 50ohms load)
  • Output Impedance: Approximately 5Ω
  • Frequency Response: 20Hz to 30MHz, -3dB
  • Power Requirement: 100~130VAC or 200-260VAC, 50/60Hz, 50 Watts
  • Dimensions (HxWxD): 5.2in x 12.8in x 15.7in (132x324x398mm)
  • Weight: 18.7lbs (8.5kg)
  • Environment Within Specified Accuracy: +10°C to 350°C, 10% to 80% relative humidity
  • Full Operation: 0°C to 50°C, 10% to 80% relative humidity
  • Storage Temperature: -30°C to 70°C, 10% to 90% relative humidity
  • Function Generator
    • Frequency: 0.5Hz~5MHz in 6 steps, controlled by one push switch
    • Output Waveform: Sine, Square, Triangle (3 Waveforms total)
    • Stability: 0.1% - 15 minutes after power on; 0.2% - 24 hours after power on
    • Limits of Operation: 0degC~40degC, 10 to 80% relative humidity
    • Limits of Operation: -20degC~70degC, 0 to 90% relative humidity
  • Frequency Counter
    • Display: 5 digits, 0.36in Red LED, Display at Hz or kHz unit, auto range
    • Gate Time Auto Select: from 10S to 0.25S. According to the frequency of the input signal Auto select
    • Gate Time Auto Detect: The gate time LED wil FLASH when with input and will OFF without input signal, Auto detect
    • Gate Time Auto Reset: The data will hold 10S Max. After the input signal is stop and then auto reset
    • Resolution: 0.001Hz to 1kHz according to the frequency of the input signal. auto select
    • Max. Counter range: 0.1Hz to 50MHz
    • Accuracy: +0.01% + 1 digit or 1/99999 + 1 digit
    • Time Base: 18.432MHz + 10ppm (23°C ±5°C)

Back to List of Oscilloscopes
Back to Main Menu

AS-9307 Alexan Single Trace Oscilloscope



View larger image 		This model is a single trace multipurpose oscilloscope designed to operate in the frequency range from DC to 5MHz with 3 inch (75mm) CRT screen and high vertical sensitivity of 10mV/div. It is particularly suitable for production lines, laboratories or repairshops to observe the waveform of electronic signals. The AS-9307 provides advanced features such as high vertical input impedance, 1MW direct cascade amplifiers, and internal/external synchronizing circuit.

Back to List of Oscilloscopes
Back to Main Menu

AS-9640 Alexan Dual Trace 40MHz Oscilloscope



View larger image 		The AS-9640 oscilloscope has dual channels with frequency bandwidth DC to 40MHz at -3dB or 40MHz at - 6dB, maximum sweep time 10ns/DIV, and maximum sensitivity 1mV/DIV. Waveforms are accurately presented on the oscilloscope's 150mm rectangular CRT screen with internal graticule. This oscilloscope features delay sweep, two sweep mix, CHB output, Z-modulation, and dual time base.

Back to List of Oscilloscopes
Back to Main Menu

Order now!