Zigbee Modules


XBee® & XBee-PRO® ZB ZigBee® PRO RF Modules


The low-power XBee ZB and extended-range XBee-PRO ZB use the ZigBee PRO Feature Set for advanced mesh networking.

The XBee ZB platform features:

  • Low-cost, low-power mesh networking
  • Interoperability with ZigBee PRO Feature Set devices from other vendors
  • Support for larger, more dense mesh networks
  • 128-bit AES encryption
  • Frequency agility
  • Over-the-air firmware updates (change firmware remotely)


By deploying this and any XBee device, OEMs are leveraging the value of the XBee product family and Digi's unsurpassed Drop-in Networking offering of gateways, adapters and routers. In addition, XBee users can take advantage of platform agility-the ability to rapidly change their XBee solution with minimal development.
XBee & XBee-PRO ZB hardware note: The XBee & XBee-PRO ZB share hardware with XBee & XBee-PRO ZNet 2.5. As a result, modules can be "converted" from one platform to another by loading different firmware onto a given module. Contact Digi Support for details.

Product summary:
  • ISM 2.4 GHz operating frequency
  • XBee: 2 mW (+3 dBm) power output (up to 400 ft RF LOS range)
  • XBee-PRO: 50 mW (+17 dBm) power output (up to 1 mile RF LOS range)
  • RPSMA connector, U.FL connector, Chip antenna, or Wired Whip antenna
  • Industrial temperature rating (-40° C to 85° C)
  • Approved for use in the United States, Canada, Australia and Europe
  • Advanced mesh networking and low-power modes supported

Available XBEE Embedded RF Modules in our stores:

  • XBee ZB low power ZigBee module w/ chip antenna
  • XBee ZB low power ZigBee module w/ integrated wire antenna
  • XBee ZB low power ZigBee module w/ U.FL connector
  • XBee-PRO ZB long range ZigBee module w/ chip antenna
  • XBee-PRO ZB long range ZigBee module w/ integrated wire antenna
  • XBee-PRO ZB long range ZigBee module w/ U.FL connector
  • XBee-PRO ZB long range ZigBee module w/ RPSMA connector

Back to Main Menu

XB24-DKS-INT XBee 802.15.4 (Formerly Series 1) Starter Development Kit w/ 2 XBee Modules


The 2.4 GHz XBee Starter Kit includes everything you need to set-up a wireless 802.15.4 network in a matter of minutes. The 1mW XBee OEM RF Modules make it simple to design and range test custom wireless networks. The XBee Starter Kit includes worldwide agency approvals and advanced networking features.

The development kit includes:

     (2) XBee 802.15.4 w/ Wire Antenna
     (1) RS-232 Development Board
     (1) USB Development Board
     (1) RS-232 Serial Cable
     (1) USB Cable
     (1) 9V Battery Clip

Back to Main Menu

XB24-PDK-INT XBee 802.15.4 (Formerly Series 1) Development Kit w/ 3 XBee and 2 XBee-PRO Modules


The 2.4 GHz XBee 802.15.4 (formerly Series 1) Professional Developers Kit includes everything you need to set up a wireless 802.15.4 network in a matter minutes. The inclusion of both 60mW and 1mW modules allow OEMs and systems integrators to determine the needs for their custom wireless networks. With worldwide agency approvals and advanced networking features, the XBee Professional Developers Kit is the premier 802.15.4 development solution.

The development kit includes:

     (1) XBee-PRO 802.15.4 w/ Wire Antenna
     (1) XBee-PRO 802.15.4 w/ U.fl Connector
     (1) XBee 802.15.4 w/ Wire Antenna
     (1) XBee 802.15.4 w/ Chip Antenna
     (1) XBee 802.15.4 w/ U.fl Connector
     (4) RS-232 Development Boards
     (1) USB Development Board
     (2) U.fl to RPSMA Adapter Cables
     (1) RS-232 serial Cable
     (1) USB Cable
     (2) 2.4 GHz RPSMA Antennas
     (3) 9V Battery Clip

Back to Main Menu

XPP09-DMDK XBee-PRO DigiMesh 900 Development Kit w/ 4 XBee-PRO Modules


The 900 MHz XBee-PRO® DigiMesh 900 development kit includes everything you need to setup a peer-to-peer mesh network with the DigiMesh protocol. With support for sleeping routers and a simplified mesh architecture, DigiMesh allows you to create scalable mesh applications with extended battery life and the range advantages of 900 MHz. The XBee-PRO DigiMesh 900 is a part of the XBee platform family.

The development kit includes:

     (1) XBee-PRO DigiMesh 900 w/ RPSMA Connector
     (1) XBee-PRO DigiMesh 900 w/ U.fl Connector
     (2) XBee-PRO DigiMesh 900 w/ Wire Antenna
     (2) RS-232 Development Boards
     (2) USB Development Board
     (2) RS-232 serial Cable
     (2) USB Cable
     (2) 900 MHz RPSMA Antennas
     (2) 9V Battery Clip
     Various Adapters

Back to Main Menu

XB24-BPDK-W - XBee ZB/ZNet 2.5 Development Kit w/ 2 XBee-PRO modules & 3 regular XBee modules


The 2.4 GHz XBee ZB/ZNet 2.5 (formerly Series 2) Development Kit includes everything you need to set up a wireless ZigBee network in a matter of minutes. Two 50 mW PRO modules and three 1mW regular modules allow OEMs and systems integrators to establish self-discovering/self-healing ZigBee mesh topologies within their custom wireless networks.

The development kit includes:

     (1) XBee ZB/ZNet 2.5 w/ Wire Antenna      (Coordinator)
     (1) XBee ZB/ZNet 2.5 w/ Chip Antenna      (Router)
     (1) XBee ZB/ZNet 2.5 w/ U.fl Connector      (Router)
     (2) XBee-PRO ZB/ZNet 2.5 w/ RPSMA Connector      (Router)
     (3) RS-232 Development Boards
     (2) USB Development Boards
     (3) 2.4 GHz RPSMA Antenna
     (1) U.fl to RPSMA Adapter Cable
     (3) RS-232 Serial Cables
     (2) USB Cables
     (3) 9V Battery Clips
     (3) Adapters

Back to Main Menu

RS-232 Development Board


View larger image

This is an interface board used with XBee/XBee-PRO radios.

Back to Main Menu

Order your units now!