Programmers and Development Tools


8051 Programmer


To compliment the 8051 Training Module, Alexan came up with an affordable programmer for the ATMEL AT89C2051 and AT89C4051 microcontrollers.

The ATMEL AT89C2051/AT89C4051 Programmer has a comprehensive set of features that allows you to view, program, erase and secure the data of an ATMEL microcontroller.
View larger image

Equipped with a computer-interface, the computer-interface software allows you to:

  1. Load or open hex files containing the code you want to program to the device.
  2. Read the hex code from the device and store it in the program buffer for editing or saving.
  3. View and edit the hex codes in the program buffer.
  4. Save any changes made in the program buffer to a hex file for use with other devices.
  5. Check the device ID.
  6. Erase all the data in the device.
  7. Blank check the device.
  8. Program the hex codes found in the program buffer to the device
  9. Verify the programmed hex code in the device
  10. Protect the device from accidentally reprogramming by locking the device so that the code cannot be read from it.
For more information about ATMEL microcontroller, please visit ATMEL's website at http://www.atmel.com to download datasheet and technical notes.

Download 8051 Programmer User's Manual

Back to List of Available Programmers & Development Tools
Back to Main Menu

AT-701 EPROM Eraser



View larger image



 SPECIFICATIONS:
  • Electronic timer adjustable from 10 to 60 minutes
  • Two layer design fully utilizes both top and bottom areas of the UV tube
    • Top Layer Capacity: up to 8 pieces of 32-pin DIP EPROMs
    • Bottom Layer Capacity: up to 9 pieces of 40-pin DIP EPROMs
  • Top layer features a stair type of receptacle to ensure all 24, 28 or 32-pin EPROMs are positioned correctly for maximum UV exposure
  • Anti-static sponge surfaces provide EPROMs with protection from static penetration
  • Power-on LED indicators
  • Lightweight, space-saving, and durable plastic body design

Back to List of Available Programmers & Development Tools
Back to Main Menu

Atmel AVR ISP In-System Programmer


The AVR ISP gives the designer a compact and reliable programming tool to program all In-System Programmable AVR microcontrollers through a 6- or 10-pin ISP connector. Interfaces with AVR Studio for code writing and debugging. This free software can be downloaded from Atmel's website. The programming software can be controlled from both a Windows environment and a DOS command-line interface.
View larger image

SPECIFICATIONS:
  • Interface with AVR Studio
  • ISP Programming of all In-System Programmable AVR devices
  • Programs both Flash and EEPROM
  • Supports Fuse and Lock Bit Programming
  • Supports RC Oscillator Calibration
  • Adjustable speed supports all target boards running at a speed higher than 8KHz
  • RS-232 interface
  • Powered from target
  • Upgradeable to support future devices

Back to List of Available Programmers & Development Tools
Back to Main Menu

ALL-100 Universal Programmer


View larger image

ALL-100 features high-tech pin drivers to provide excellent programming quality at high-speed, high-realiability and high-expansion flexibility, and are fully programmable to meet programming needs including low voltage devices in the market.

SPECIFICATION:
  • Excellent Performance — Utilize flexible pin drivers to get accurate waveforms, high programming speed plus over current protection, wrong insertion detection, self diagnostic etc. ensures ALL-100 excellent performance
  • Wide Devices Coverage — Wide range of programmable devices from 8 pins up to 300 pins covering EPROM, EEPROM, Serial PROM, flash, PLD/CPLD/FPGA,MPU/MCU, etc. in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA etc. package types
  • Inherit ADAPTER/CONVERTER from ALL-series — Over 500 ADAPTERs, 150 CONVERTERs can be used with single socket programming module or Gang Programming Module to ensure your capital investment retained.
  • Easy to Use — Runs on Windows and works with IBM PC through USB port to perform a high-speed data transmission and accurate programming waves. After master read or file download from PC, user only needs to select (Blank check, Program, Auto) function from Menu and then hit YES key on programmer to start program function. Operation is very easy
  • Multiple Units Working Simultaneously — Via tiered star USB topology to achieve highest throughputs
  • Release New Device Support via Internet Weekly — Receive new device support software at no charge
  • Worldwide Service — Distribution channel covers 35 countries worldwide. Your problem could be taken care anywhere around the world
  • Ideal for Engineering as well as Production Environment — Wide device covering range, flexible future expansion capability help users to achieve challenging time-to-market goal

Back to List of Available Programmers & Development Tools
Back to Main Menu

PCB Etching Tank


FEATURES:

  • This high quality PCB etching tank is ideal for PCBs upto 23x30 cm in size.
  • Includes simple PCB clips for easy handling.
  • Suitable for etching single and double sided PCBs.
  • Can be used with an optional Air Pump and header for faster and more efficient etching.
  • Super thin tank, for maximum size with minimum solution
  • With graduations on the tank for easy measurement

Back to List of Available Programmers & Development Tools
Back to Main Menu

ZiLOG Z86CCP01ZEM Emulator


View larger image

The ZiLOG Z8 Consumer Control Processor (CCP) Emulator that comes with ZiLOG's Development Studio software is carefully engineered to provide the best balance between reasonable cost and useful features to shorten your development time for Z8 CCP-based products.

KEY FEATURES:
  • Edit the contents of Program Memory or the registers, track memory locations, set break points in ROM, and single-step into codes
  • Multiple windows can be viewed and the contents of Program Memory, External Memory, and register files can be edited
  • Multiple emulators can be operated simultaneously, provided there are enough memory and serial communication ports on your PC
  • Because of multitasking features of the Z8 Emulator GUI, you can use other Windows applications while the emulator GUI is running
  • Learn about the emulator and start writing and debugging software using the memory available in the emulator — with or without a finished design
  • BISYNC error-correcting communications protocol
  • Selectable RS-232C Communication Baud Rate &mdash from 9600bps to 57600bps
  • Improved On-Line Help
  • Programming support for One-Time Programmable (OTP) devices, including device serialization
SUPPORTED ZILOG Z8 DEVICES:
  • Emulation:
    • Z86C02/03/04/06/08/16
    • Z86C30/31/32/33/34/233
    • Z86C40/43/243
  • OTP Programming:
    • Z86E02/03/04/08
    • Z86E30/31/33/34/733
    • Z86E40
SPECIFICATIONS:
  • Power Requirements: +8.0VDC @ 0.5A Minimum (Typical)
  • Supply Voltage: +7.5VDC to 10.0VDC (+8.0VDC Typical)
  • Operating Temperature: 20°C ± 10°C
  • Operating Humidity: 10-90% relative humidity (Noncondensing)
  • Minimum Emulation Speed: 1MHz Internal SCLK
  • Maximum Emulation Speed: 6MHz Internal SCLK, 12MHz External Crystal (Shipped with 8MHz Crystal)
  • Dimensions (LxWxH): 7.00in x 9.00in x 0.90in (17.7cm x 22.9cm x 2.3cm)
  • Serial Interface: RS-232C @ 9600, 19200 (default), 28800 or 57600 Baud Rate
COMPUTER MINIMUM REQUIREMENTS:
  • IBM PC 486-Based or Pentium-based Machine
  • at least 33MHz (66MHz preferred)
  • at least 4MB RAM (8MB preferred)
  • VGA or SVGA Video Adapter
  • 2.5MB Hard Disk Space
  • Monitor
  • 3.5in Floppy Drive
  • RS-232C COM Port
  • Mouse or Pointing Device
  • Windows 3.1 or higher
CONTENTS:
  • 8-Bit Embedded Microcontroller Product Guide CD
  • ZiLOG Development Studio CD:
    • Z8 GUI Software
    • ZiLOG ZASM Cross Assembler/ZiLOG MOBJ Object File Utility
  • Z8 CCP Emulator User's Manual
  • 18-Pin DIP Target Cable
  • Circuit Board:
    • CMOS Z86C9320VSC
    • 20MHz CMOS Z86C5020FSE ICE Chip
    • 8K x 8 Static RAM (for Code Memory)
    • 18-Pin DIP Zero Insertion Force (ZIF) Programming Socket
    • Sockets available for 28/40-Pin Target Cables
    • Holes available for 28/40-Pin ZIF Programming Sockets
    • DB25 RS232C Interface

Back to List of Available Programmers & Development Tools
Back to Main Menu

Order your units now!